Our Bedside Units; Indirect and direct lighting elements, telephone, data, system, etc., to be used in patient rooms and similar places. These are the units designed for the patient with its systems and for the efficient and safe use of the diagnostic and treatment equipment by the hospital staff with its other functions.
Our units are manufactured in horizontal type to be mounted on the wall, minimizing dust and dirt accumulation for the relevant purpose, with easy-to-clean surfaces and corners, taking into account the ergonomic compatibility, safety and hygiene criteria required for easy use of the patient and the relevant personnel.
- Product features;
Our Bedside Units; It is produced in accordance with TS EN ISO 11197, TS EN 60601-1 standards.
Our units; body and covers are extruded and heat treated, manufactured from 1st quality aluminum profile.
Our units; It consists of 3 sections, medical gas and electrical installations are separated from each other through 3 related channels. The main body profile with 3 channels is completed with lower, upper and front covers as it is mounted on the wall at the bedside. The front cover profile closes the middle section reserved for the medical gas installation. There are lighting elements and other electrical fixtures in the upper and lower channels. The parts of the lower and upper covers that hit the lighting fixtures are also made of extruded transparent polycarbonate (prismatic light diffuser) material.
Our units; At least 150 cm for 1 person was designed. The size of our units can be enlarged upon request.
The front, top and bottom covers should not be damaged by any screws etc. during service. It can be opened and closed without the need to remove the material.
Our units; It is painted with electrostatic paint. Color selection is made from the RAL catalogue.
Electronic ballast is used in lighting fixtures.
The connection type of the medical gas sockets used on our units has been prepared in accordance with the DIN 13260-2 standard.
In order to provide a call handset unit that can control reading and general lighting fixtures together with the nurse / attendant call system components that can be mounted on our units, and/or in case of request, the lighting fixtures can be connected to the necessary installation and/or their provisions can be left in order to ensure parallel operation. .
All electrical cables used on the unit are of halogen-free type, and cable distributions are made by passing them through cable channels when necessary. All electrical services of the unit are tested after manufacturing.